XL7105-SY A7105 2.4G Wireless Transceiver Module C

Радиомодуль MD7105-SY A7105 2,4G модуль беспроводный Wireless Transceiver Module Arduino

XL7105-SY A7105 2.4G Wireless Transceiver Module CC2500

материал: Copper + plastic + PCB
характеристики: 2.4GHz AMIC A7105 chipset;
Operating frequency: 2400~2483MHz;
Max output power: 0dBm (1mW);
Operating rate: 500Kbps;
Receiving sensitivity: -99dBm@250Kbps
Application Various types of electronic products or DIY lovers



Small size (QFN4 X4, 20 pins).
Frequency band: 2400 ~ 2483.5MHz.
FSK or GFSK modulation
Low current consumption: RX 16mA, TX 20mA (at 0dBm output power).
Low sleep current (1.5 uA).
On chip regulator, support input voltage 2.0 ~ 3.6 V.
Programmable data rate from 2Kbps to 500Kbps.
Programmable TX power level from – 20 dBm to 1 dBm.
Ultra High sensitivity:
-95dBm at 500Kbps on-air data rate.
-97dBm at 250Kbps on-air data rate
-104dBm at 25Kbps on-air data rate
-107dBm at 2Kbps on-air data rate
Fast settling time (130 us) synthesizer for frequency hopping system.
Built-in Battery Detector.
Support low cost crystal (6 / 8 /12 / 16 / 20 / 24MHz).
Support crystal sharing, (1 / 2 / 4 / 8MHz) to MCU.
Support Frequency Compensation.
Easy to use.
Support 3-wire or 4-wire SPI.
Unique Strobe command via SPI.
ONE register setting for new channel frequency.
8-bits Digital RSSI for clear channel indication.

Fast exchange mode during TRX role switching.

Auto RSSI measurement.
Auto Calibrations.
Auto IF function.
Auto CRC Check.
Auto FEC by (7, 4) Hamming code (1 bit error correction / code word).
Data Whitening for encryption and decryption.
Separated 64 bytes RX and TX FIFO.
Easy FIFO / Segment FIFO / FIFO Extension (up to 256 bytes).
Support direct mode with recovery clock output to MCU.
Support direct mode with frame sync signal to MCU.

Цена указана за 1 шт

#6546