Щоб керувати налаштуваннями профілю, вашими обраними лотами, ставками та виставляти товари на торги.
Стан : нове
Наявність : в наявності
Минимальная плата STM8S103F3P6 (system board STM8S
STM8)
Features:
STM8 development board, minimum system board, core board,
STM8S103F3P6.
STM8S core board of the highlights:
The development board using MicroUSB cable supply, compatible with
smart phone lines, data lines is simple and easy to get, but not
USB MINI line-powered, USB MINI line is not easy to find, has been
gradually phased out. Other manufacturers of products are used in
MINI-USB port, this is not applicable for customers.
1. Use STM8S103F3P6 as the master IC.
2. You can use 2.54 pin on the board or power supply pad, the pad
when using power supply, input voltage range 4.5V-15V, can output
to the outside through pin 3.3V!
Note: 5V pin’s voltage is the input voltage of the module.
3. leads to all pins, the pins next to the pin marked the label,
with a reset button, power LED, and the program demonstrates LED,
small but perfectly formed.
4. Support SWIM debug mode.
5. Size: 3cm x 1.8cm.
STM8S103F3P6 performance comparison:
STM8S003F3 chips only 128 bytes of EE, STM8S103F3 640 bytes.
STM8S003F3 chip FLASH erase only 100 times, STM8S103F3 can erase
ten thousand times.
STM8S103F2 chip FLASH only 4K bytes, STM8S103F3 have 8K bytes.
Conclusion: STM8S003F3 only suitable for mature products,
STM8S003F3 core board is not suitable for development. However
STM8S103F3 suitable for the development of the use of, our board of
this development is the use of this chip.
Features:
STM8 development board, minimum system board, core board,
STM8S103F3P6.
STM8S core board of the highlights:
The development board using MicroUSB cable supply, compatible with
smart phone lines, data lines is simple and easy to get, but not
USB MINI line-powered, USB MINI line is not easy to find, has been
gradually phased out. Other manufacturers of products are used in
MINI-USB port, this is not applicable for customers.
1. Use STM8S103F3P6 as the master IC.
2. You can use 2.54 pin on the board or power supply pad, the pad
when using power supply, input voltage range 4.5V-15V, can output
to the outside through pin 3.3V!
Note: 5V pin’s voltage is the input voltage of the module.
3. leads to all pins, the pins next to the pin marked the label,
with a reset button, power LED, and the program demonstrates LED,
small but perfectly formed.
4. Support SWIM debug mode.
5. Size: 3cm x 1.8cm.
STM8S103F3P6 performance comparison:
STM8S003F3 chips only 128 bytes of EE, STM8S103F3 640 bytes.
STM8S003F3 chip FLASH erase only 100 times, STM8S103F3 can erase
ten thousand times.
STM8S103F2 chip FLASH only 4K bytes, STM8S103F3 have 8K bytes.
Conclusion: STM8S003F3 only suitable for mature products,
STM8S003F3 core board is not suitable for development. However
STM8S103F3 suitable for the development of the use of, our board of
this development is the use of this chip.
Features:
STM8 development board, minimum system board, core board,
STM8S103F3P6.
STM8S core board of the highlights:
The development board using MicroUSB cable supply, compatible with
smart phone lines, data lines is simple and easy to get, but not
USB MINI line-powered, USB MINI line is not easy to find, has been
gradually phased out. Other manufacturers of products are used in
MINI-USB port, this is not applicable for customers.
1. Use STM8S103F3P6 as the master IC.
2. You can use 2.54 pin on the board or power supply pad, the pad
when using power supply, input voltage range 4.5V-15V, can output
to the outside through pin 3.3V!
Note: 5V pin’s voltage is the input voltage of the module.
3. leads to all pins, the pins next to the pin marked the label,
with a reset button, power LED, and the program demonstrates LED,
small but perfectly formed.
4. Support SWIM debug mode.
5. Size: 3cm x 1.8cm.
STM8S103F3P6 performance comparison:
STM8S003F3 chips only 128 bytes of EE, STM8S103F3 640 bytes.
STM8S003F3 chip FLASH erase only 100 times, STM8S103F3 can erase
ten thousand times.
STM8S103F2 chip FLASH only 4K bytes, STM8S103F3 have 8K bytes.
Conclusion: STM8S003F3 only suitable for mature products,
STM8S003F3 core board is not suitable for development. However
STM8S103F3 suitable for the development of the use of, our board of
this development is the use of this chip.
Features:
STM8 development board, minimum system board, core board,
STM8S103F3P6.
STM8S core board of the highlights:
The development board using MicroUSB cable supply, compatible with
smart phone lines, data lines is simple and easy to get, but not
USB MINI line-powered, USB MINI line is not easy to find, has been
gradually phased out. Other manufacturers of products are used in
MINI-USB port, this is not applicable for customers.
1. Use STM8S103F3P6 as the master IC.
2. You can use 2.54 pin on the board or power supply pad, the pad
when using power supply, input voltage range 4.5V-15V, can output
to the outside through pin 3.3V!
Note: 5V pin’s voltage is the input voltage of the module.
3. leads to all pins, the pins next to the pin marked the label,
with a reset button, power LED, and the program demonstrates LED,
small but perfectly formed.
4. Support SWIM debug mode.
5. Size: 3cm x 1.8cm.
STM8S103F3P6 performance comparison:
STM8S003F3 chips only 128 bytes of EE, STM8S103F3 640 bytes.
STM8S003F3 chip FLASH erase only 100 times, STM8S103F3 can erase
ten thousand times.
STM8S103F2 chip FLASH only 4K bytes, STM8S103F3 have 8K bytes.
Conclusion: STM8S003F3 only suitable for mature products,
STM8S003F3 core board is not suitable for development. However
STM8S103F3 suitable for the development of the use of, our board of
this development is the use of this chip.
Посмотреть другие мои торги | |||
Передоплата
За домовленністю/інше
За домовленністю